Справочник Пользователя для StarTech.com Life Jacket NETRS2321P
Instruction Manual
2
DIN Rail Mounting
Attach the included DIN Rail brackets (one per side) using the provided screws to the
top DIN Rail screw hole (marked in the above diagram), and clip to your DIN Rail
Load Default Settings / System Reset Button
Load Default Settings
Press and hold this button for more than 3 seconds, then release to load the factory
default settings.
IP address: 10.1.1.1
Subnet Mask: 255.0.0.0
Login ID / Password: admin
System Reset
Press and hold this button for more than 10 seconds, then release to reboot the device
(maintains configuration settings)
LED Indicators
LED Name
Status
Description
Ready
On
Power is on and the device is ready.
Off
Power is off or the device is not ready.
Link/Act
On
UTP is link.
Blinking
UTP Tx/Rx is activity.
Off
UTP is not link.
Tx/Rx
Blinking
RS-232 port is transmitting or receiving
data.
Off
No data is transmitting or receiving in
RS-232 port.