Справочник Пользователя для Roberts Radio SOUND66
15
Manual tuning - FM
1. Fully extend the telescopic aerial. The aerial should be fully extended
and positioned vertically for optimum reception.
2. Press
the
On / Standby button to switch on your sound system.
3. Press
the
FM button to select the FM band.
4. Repeatedly press and release the Tuning Up or Down buttons to
tune to a station. The frequency will change in steps of 50kHz.
If the radio is tuned to a station of suffi cient signal strength with RDS
information present, then the display may change to show the station
name.
information present, then the display may change to show the station
name.
5. When the waveband end is reached the radio will recommence tuning
from the opposite waveband end.
6. Adjust
the
Volume to the required setting.
7. To switch off your sound system press the On / Standby button.
Note:
If you fi nd that FM reception is poor, try repositioning the Telescopic aerial
fully extend and position vertically for optimum reception.
If you fi nd that an FM broadcast has a lot of background hiss, this may
often be reduced by setting the radio into Mono reception mode for the
current FM station. Please refer to the section "Stereo / Mono setting - FM"
on page 36 for further details.
If you fi nd that FM reception is poor, try repositioning the Telescopic aerial
fully extend and position vertically for optimum reception.
If you fi nd that an FM broadcast has a lot of background hiss, this may
often be reduced by setting the radio into Mono reception mode for the
current FM station. Please refer to the section "Stereo / Mono setting - FM"
on page 36 for further details.
3
2,7
4
4
6
6