Справочник Пользователя для TP-LINK TL-SG2008

 

85 

¾

 

¾

1 

Create VLANs 

Create three VLANs with the VLAN ID 3, 4 and 5 respectively, 
and specify the description of VLAN3 as Multicast VLAN on 
VLAN→802.1Q VLAN page.   

2 Configure 

ports 

On 

VLAN→802.1Q VLAN function pages. 

For port 3, configure its link type as Tagged, and add it to VLAN3, 
VLAN4 and VLAN5. 
For port 4, configure its link type as Untagged, and add it to 
VLAN3 and VLAN 4. 
For port 5, configure its link type as Untagged, and add it to 
VLAN3 and VLAN 5. 

3 Enable 

IGMP 

Snooping function 

Enable IGMP Snooping function globally on Multicast→IGMP 
Snooping→Snooping Config page. Enable IGMP Snooping 
function for port 3, port 4 and port 5 on Multicast→IGMP 
Snooping→Port Config page. 

4 Enable  Multicast 

VLAN 

Enable Multicast VLAN, configure the VLAN ID of a multicast 
VLAN as 3 and keep the other parameters as default on 
Multicast→IGMP Snooping→Multicast VLAN page.  

5 

Check Multicast VLAN  3-5  and  Multicast VLAN 3 will be displayed in the IGMP 

Snooping Status table on the Multicast→IGMP 
Snooping→Snooping Config page. 

In a network, receivers can join different multicast groups appropriate to their needs. The switch 
forwards multicast streams based on multicast address table. The Multicast IP can be 
implemented on Multicast IP Table, Static Multicast IP page. 

On this page you can view the multicast IP table on the switch.