Справочник Пользователя для TP-LINK TL-SG2008
87
Figure 8-9 Static Multicast IP Table
The following entries are displayed on this screen:
¾
Create Static Multicast
Multicast IP:
Enter static multicast IP address.
VLAN ID:
Enter the VLAN ID of the multicast IP.
Forward Port:
Enter the forward port of the multicast group.
¾
Search Option
Search Option:
Select the rules for displaying multicast IP table to find the desired
entries quickly.
z
entries quickly.
z
All: Displays all static multicast IP entries.
z
Multicast IP: Enter the multicast IP address the desired entry
must carry.
z
VLAN ID: Enter the VLAN ID the desired entry must carry.
z
Port: Enter the port number the desired entry must carry.
¾
Static Multicast IP Table
Select:
Select the desired entry to delete the corresponding static
multicast IP. It is multi-optional.
multicast IP. It is multi-optional.
Multicast IP:
Displays the multicast IP.
VLAN ID:
Displays the VLAN ID of the multicast group.
Forward Port:
Displays the forward port of the multicast group.
8.3 Multicast Filter
When IGMP Snooping is enabled, you can specified the multicast IP-range the ports can join so as
to restrict users ordering multicast programs via configuring multicast filter rules.
to restrict users ordering multicast programs via configuring multicast filter rules.
When applying for a multicast group, the host will send IGMP report message. After receiving the
report message, the switch will firstly check the multicast filter rules configured for the receiving
report message, the switch will firstly check the multicast filter rules configured for the receiving