Справочник Пользователя для Packard Bell REFDOCS02420200

 

12

 

 

 

2.  Take out the system fan by removing the screws, located on the back of the 

chassis, holding the system fan to the chassis. 

 

 

 
 

To remove the power supply unit, first remove the rear bezel (see section Removing the 
Rear Bezel), remove the left side cover (see section Removing the Left Side Cover), 
remove all add-in cards (see section Removing Add-In Cards), remove the CPU (see 
section Removing the CPU and/or the section Removing the Pentium 4 CPU), remove the 
optional system fan (see section Removing the System Fan); then follow the steps below: 
 

1.  Disconnect all power cables connected to the motherboard. 

 

 

 

2.  Remove any memory module installed (refer to the motherboard documentation for