Справочник Пользователя для Packard Bell REFDOCS02420200

 

11

 

 

3.  Lift the lever to unlock the CPU from its socket. 

 

 

 

4.  Take out the CPU. Be very careful not to remove any of the heat paste on the CPU 

surface! 

 
 

If the CPU installed is a Pentium IV, please perform this additional step: 
 

1.  Remove the CPU heat bracket by removing the four screws. 

 

 

 
 

To remove the optional system fan, first remove the rear bezel (see section Removing the 
Rear Bezel), remove the left side cover (see section Removing the Left Side Cover); then 
follow the steps below: 
 

1.  Disconnect the cable connecting the system fan to the motherboard.