Справочник Пользователя для North Star M268180M
Assembly (continued)
14
S
tep Eight: Check and test complete d assembly.
WARNING
Che ck and test comple te d asse mbly
Serious injury could result from chemical leaks if sprayer is improperly
assembled or the design of the sprayer is modified.
assembled or the design of the sprayer is modified.
Follow the steps below to ensure the sprayer is properly assembled. Never
modify the sprayer design.
modify the sprayer design.
1. Che ck assembly
Che ck assembly to assure the sprayer is prope rly assemble d and in safe
working condition:
working condition:
a) Check that the gun clip screws are tight, hose clamps are secure, and tank
straps are properly fastened.
b) While it is unlikely that factory assembled components become loose, they
should also be checked to make sure they are tight.
2. Test with water
Te st the system for leaks with wate r:
a) First read the instructions in this Owner’s Manual for Operation of the
sprayer
b) Fill the tank with water per the instructions in this manual.
Important: The sprayer should be OFF when you fill the tank.
c) Check for leaks throughout the system by operating the sprayer per the
instructions in this manual:
i) T urn the sprayer ON. (See Operation Instructions)
ii) Operate the spray gun. (See Operation Instructions)
iii) Adjust the pressure through its full range – to maximum and back.
ii) Operate the spray gun. (See Operation Instructions)
iii) Adjust the pressure through its full range – to maximum and back.
(See Operation Instructions)
d) If a leak is detected, fix the leak and re-test the system with water.