Справочник Пользователя для MPC OM-20000072
Software Programs
Chapter 6
MPC User Manual Rev 0D
61
CONFIGURE MODEM PORT
An example of the Configure Modem Port window is shown in Figure 57.
Figure 57: Configure Modem Port
First enter the user name and password the MPC will use to ‘connect’ to the PPP host in the User
Name and Password fields. Then enter the phone number that the modem is to call out on to make a
connection with the host or internet service provider. Enter the number of redial attempts you would
like the modem to make and choose a length of time between these attempts.
Name and Password fields. Then enter the phone number that the modem is to call out on to make a
connection with the host or internet service provider. Enter the number of redial attempts you would
like the modem to make and choose a length of time between these attempts.
Choose how long, or never, to wait while the connection is idle before the modem should hang up.
Select to enter the IP address for the modem connection in the Set IP field, or select Obtain an IP
Automatically for the IP address to be assigned automatically.
Automatically for the IP address to be assigned automatically.
Click on the OK button to save your changes or click on the Home button to cancel the settings return
you to the Modulated Precision Clock home page.
you to the Modulated Precision Clock home page.
* Some of these parameters can also be adjusted via the VFD panel on the MPC.
MPC1
12MPC34
2954500