Справочник Пользователя для InSciTek Microsystems Allworx Phone
Phone Guide
300 Main Street • East Rochester, NY 14445 • Toll Free 1-866-ALLWORX • 585-421-3850 • www.allworx.com
© 2007 InSciTek Microsystems, Inc. All rights reserved. Allworx is a registered trademark of InSciTek Microsystems. All other names may be
trademarks or registered trademarks of their respective owners.
Revised: March 28, 2007
Page 16
o
Flashing green means there is at least one call in the Queue and will flash on all phones that are
logged in.
logged in.
When the Queue PFK light is flashing, you will be able to pick up the call by pressing the PFK or
Speakerphone button for hands-free mode, or by using your handset or headset and pressing the PFK.
Speakerphone button for hands-free mode, or by using your handset or headset and pressing the PFK.
6.11 Call Forwarding
Dialing 451## or 452## will forward any calls that come into the phone to extension 1## or 2##.
To disable Call Forwarding for the phone, dial extension 450.
To disable Call Forwarding for the phone, dial extension 450.
6.12 Paging Zones
Dialing 46# (# representing a Paging Zones 0 through 9) on the phone will broadcast audio to any other
phones that are members of the Paging Zone.
Note: Paging Zones are set up by the System Administrator.
phones that are members of the Paging Zone.
Note: Paging Zones are set up by the System Administrator.
6.13 Conference Center
There are four Conferences Bridges on the 24x and one Conference Bridge on the 6x that support up to 8
callers. A Conference can be scheduled using the directory page or be used without scheduling ahead of time.
Users can join a Conference by dialing extension 408 from the Auto Attendant, any phone on the network, or
by being transferred to the extension by another user. An Auto Attendant shortcut my also be setup by the
System Administrator to access the Conference Center. A Conference ID and password are required in order
to enter the conference.
Note: For more information refer to the Allworx Conference Center Guide found on the website at
callers. A Conference can be scheduled using the directory page or be used without scheduling ahead of time.
Users can join a Conference by dialing extension 408 from the Auto Attendant, any phone on the network, or
by being transferred to the extension by another user. An Auto Attendant shortcut my also be setup by the
System Administrator to access the Conference Center. A Conference ID and password are required in order
to enter the conference.
Note: For more information refer to the Allworx Conference Center Guide found on the website at
www.allworx.com/support/downloads/default.asp.
The 24x supports up to 4 simultaneous conferences while the 6x supports only one conference. Default
Conference IDs and Pins for unscheduled conferences are shown in the table below:
Server
Conference ID
Password
6x, 24x
480
480
24x 481 481
24x 482 482
24x 483 483
24x 482 482
24x 483 483
Note: The 10x does not support N-Way Conferencing.