Справочник Пользователя для Infortrend EONSTOR A16E-G2130-4

Chapter 2: Hardware Installation 

 

Lower level:  Three (3) boxes are placed in the lower level. One (1) box 

contains the enclosure chassis with all the pre-installed components. The 

other two (2) boxes contain power cords and accessory items.  

Accessory items include an RS-232C audio jack cable, power cords, a null 

modem,  Quick Installation Guide, screws, and a product utility CD 

containing the Installation and Hardware Reference Manual (this 

document), the Generic Operation Manual (firmware), and the 

RAIDWatch programs and RAIDWatch User’s Manual. 

 

The following components have been preinstalled in the enclosure and 

therefore do not need to be installed: 

  2 - Forearm handles (right and left) 
  1 - Backplane board 
  1 - Controller module 
  1 - DDR RAM DIMM module (installed in the controller module) 
  2 - PSU modules 
  2 - Cooling fan modules (within PSU canisters) 

You must install the following components: 

  Hard drives (separately purchased SATA-I or SATA-II disk drives) 
  Drive trays 
  BBU module (if ordered) 

 

 

The BBU module is an optional item that can sustain cache memory in the 

event of a power failure or in the unlikely event of failing both PSUs. A 

BBU is highly recommended. The optional BBU provides additional data 

security and helps minimize the loss of data during power shutdowns. 

The BBU module is inserted into a module slot on the controller module. 

The BBU module is secured with two (2) retention screws. When shipped, 

the BBU module slot is covered with a dummy plate that must first be 

removed. 

Installation Overview 

2-7