Справочник Пользователя для Infortrend EONSTOR A16E-G2130-4

Chapter 2: Hardware Installation

Figure 2-2: Loosening the BBU Retention Screws

Step 3.

Once the retention screws are loosened, gently retrieve the

dummy plate out of the enclosure. (See Figure 2-3)

Figure 2-3: Removing the BBU Slot Dummy Plate

NOTE:

It may be difficult to remove the dummy plate as it is embedded in the

subsystem chassis. If you are unable to dislodge the sheet, wedge the

head of a flat-head screwdriver between the metal sheet and the chassis

and then gently nudge the metal sheet out of the chassis.

Step 4.

Install the BBU module. Align the BBU module with the

BBU module slot and gently insert the BBU module until

the back of the BBU module reaches the end of the slot.

Use slightly more force so that the back-end connector can

mate with the backplane.

Step 5.

Secure the BBU module to the chassis. Fasten the two (2)

retention screws on the BBU module to secure the BBU

module to the chassis. (See Figure 2-4)

BBU Installation

2-9