Справочник Пользователя для IBM LXE MX5

• 

Touch the stylus to the field of the data entry form to receive the next data 

feed.  

• 

The cursor begins to flash in the field. 

• 

The unit is ready to accept data from either the physical keypad, virtual 

keyboard, integrated scanner or a scanner connected to the serial port on 

the cradle, if the scanner applet is configured correctly. 

 

Read all cautions, warnings and labels before using the laser scanner.

 

 
To scan with the laser barcode reader, point the laser window towards a barcode 

and press the Scan button. You will see a red laser beam strike the barcode.  
Align the red beam so that the barcode is centered within the beam. The laser 
beam must cross the entire barcode. Move the MX5 towards or away from the 

barcode so that the barcode takes up approximately two-thirds the width of the 

beam.  
The Scanner Active LED turns red when the laser beam is on. Following a 

barcode scan and read the Scanner Active LED turns green for two seconds and 

the MX5 beeps, indicating a successful scan.  
The laser and Scanner Active LED automatically turn off after a successful or 

unsuccessful read. The scanner is ready to scan again after the Scan key is 

released, or after the green LED turns off following a successful scan. 

In Calendar, Tasks, and Contacts, you can include a recording in the Notes tab. 

In the Notes program, you can either create a stand-alone recording, or include 
a recording in a written note.  
Record a voice message within Notes. 

• 

From the Start menu select Notes.  

• 

Tap the Cassette icon.  

• 

Tap the red Record button.  

• 

Begin speaking.  

• 

End the recording session by tapping the square on the recording menu.  

• 

Play your recording by tapping on the speaker icon.  

The MX5 accepts input from an RS-232 device connected to either RS-232 port.