Справочник Пользователя для IBM LXE MX5

Note:  These instructions are for components made of glass. If there is a 

removable protective film sheet on the display screen, remove the film 

sheet before cleaning the screen. 

Keep fingers and rough or sharp objects away from the scan aperture and touch 

display. If the glass becomes soiled or smudged, clean only with a standard 

household cleaner such as Windex(R) without vinegar or use Isopropyl Alcohol. 

Do not use paper towels or harsh-chemical-based cleaning fluids since they may 

result in damage to the glass surface. Use a clean, damp, lint-free cloth. Do not 

scrub optical surfaces. If possible, clean only those areas which are soiled. 
Lint/particulates can be removed with clean, filtered canned air. 

The Scan buttons can be programmed by the System Administrator to perform 

the following functions: 
Disabled 

Key press has no effect. 

Scan 

Pressing this key activates the laser scanner. 

Enter 

Pressing this key confirms a forms entry or transmits information. 

See the following section titled "Enter Key Function." 

Tab 

Pressing this key moves the cursor to the next input field. 

Field Exit 

IBM 5250/TN5250 units only. Pressing this key exits an input field. 

See the following section titled "Field Exit Key Function." 

Esc 

Pressing this key cancels the current operation. 

Access: the Windows icon  | Settings | System tab | Scanner | Key tab 

Tap the desired radio button. Tap OK to close this menu option. Tap X to cancel 

changes. Any changes made are in effect immediately.  
The default setting for the right button is Enter. The default setting for the left 

button is Enter.  
When the MX5 does 

not

 have an integrated scanner, both buttons default to 

Enter keys and the Scan selection is greyed out. The buttons can be 

programmed to perform other functions when there is no internal scanner.