Справочник Пользователя для Hitachi Microscope & Magnifier S-3400N

  For Safe Handling 

SAFETY - 2

 

 

 

General Precautions on Safety 

 

Before Using the System 

 

■  Before using this product, read the operating manual careful and 

be sure to understand its contents. 

■  The operating manual should be kept in a safe place near you for 

ready access and reference. 

■  The system should be handled according to the procedures given 

in this manual. 

■  Be sure to understand the safety-related instructions provided in 

this manual and heed them. 

■  Be sure to observe the precautions indicated on the system or in 

the manual.    Failure to heed such precautions can result in 
equipment damage or bodily injury. 

■  Be sure to observe the operating instructions on the product itself 

and those provided in its operating manual. 

■  Do not carry out modification of the instrument, parts 

replacement, use non-specified parts, nor detach safety 
mechanisms since this could be hazardous. 

■  Do not perform any operation or action in any way other than as 

provided in this manual.    When in doubt, call the designated field 
engineer. 

■  The customer is responsible for proper ventilation of the room 

when using chemicals.    Inadequate ventilation could cause a 
health hazard. 

■  Most system operations are performed by viewing the monitor.   

Looking at the monitor continuously for long hours can cause 
fatigue-related eye problems.    For the safe system operation 
involving the use of display devices, adequate labor management 
standards should be established and implemented. 

■  Keep in mind that the hazard warnings in this manual or on the 

machine cannot cover every possible case, as it is impossible to 
predict and evaluate all circumstances beforehand.    Be alert and 
use your common sense. 

 
The above instructions should be observed strictly.    Failure to do so 
can result not only in improper specimen observation and evaluation, 
but also in bodily injury.