Справочник Пользователя для Chip PC CDC01927

 
 
 
 
 
 

 

10 

Jack PC Hardware User Manual - Training Department 
Version 0506 
 

 

 

Before installing the Jack PC make sure that:  

•

 

The site wiring is appropriate (power and network). 

•

 

The site is away from devices that  can  generate electrical noise, 
electromagnetic interference, heat, vibration and such. 

•

 

The environmental requirements of the  Jack PC  as defined in the product 
specifications are met. 

•

 

Caution: This product is designed for indoor use only! 

•

 

Warning:  If you are not familiar with LAN wiring practice, use RJ-45 
Termination Connector Block to avoid wiring (Part number CPN02164 or 
CPN02166  - see accessories list). This connector can only be used to 
connect the Jack PC to an existing LAN jack. 

 

Unpack and identify the following parts: 

1.  Jack PC device (model EFI6700 or EFI680 or EFI6900). 

2.  IDC Termination Connector Block 

3.  Flex-Jack Metal Housing 

4.  Lower Cardboard Template that can be used for marking wall cutout in New 

Installation 

5.  Extraction Tool to remove device after it was installed 

6.  RJ-45 Termination Connector Block (optional) (Note: This part must be ordered 

separately in case you want to install the Jack PC in to an existing LAN jack. Chip PC 
part number: CPN02164 or CPN02166 – see accessories list) 

7.  Warranty Registration Card 

 

 

 

 

1. Jack PC device (Model 

EFI6700 or EFI6800 or 

EFI6900) 

2. IDC Termination 

Connector Block 

3. Flex-Jack Metal 

Housing 

 

 

 

 

 

4. Lower Cardboard Template 

5. Extraction Tool 

6. RJ-45 Termination 

Connector Block 

(optional) 

 

 

 

7. Warranty Registration Card