Инструкции Пользователя для Canon Microfilm Scanner 300

38

■ USER MODE ■

In the user mode, you can arbitrarily change the settings of the
following features:
•

Power saver mode

•

Hi-speed scanning mode

•

Scanning resolution

•

Cleaning mode

•

Switching the operation modes (DMP mode/Scanner mode)

1. Press the AE key about 2 seconds.

The LED of the AE key and the Print/Error display blink.
The power saving mode currently set will be displayed on the
Print/Error display.

2. Press the Brightness Adjustment key (  or  ) to move the

blinking LED up to the point where a mode, of which settings
you want to change, is located.

Power saver mode

Hi-speed scanning mode

Scanning resolution

Cleaning mode

Switching the operation modes 
(DMP mode/Scanner mode)

3. Press the Print Number Setting key (+ or –) to select the set

ting of each mode.

4. Press the Clear key to difine the setting.

When the MS300 has not been operated for a specified length of
time, the scanner switches into standby mode and stops project-
ing the image on the screen to save power consumption.

 : Does not switch into the power saver mode.

 : Switches into the power saver mode if not operated more

than 15 minutes. (set at the factory before shipping)

 : Switches into the power saver mode if not operated more

than 60 minutes.