Справочник Пользователя для Apple DualCam 640
The computer’s clock keeps time inaccurately.
Your computer has a clock that runs continuously. When the computer is
turned off, a battery keeps the clock running. If your clock begins to keep
time inaccurately, have your Apple-authorized service provider replace
the battery.
turned off, a battery keeps the clock running. If your clock begins to keep
time inaccurately, have your Apple-authorized service provider replace
the battery.
When you start up, a disk icon with a blinking question mark appears in the middle
of the screen.
of the screen.
This icon indicates that your Macintosh cannot find the system software it
needs to start up. One of the following is probably the cause:
m Your computer may be having a problem recognizing external SCSI
needs to start up. One of the following is probably the cause:
m Your computer may be having a problem recognizing external SCSI
equipment, such as hard disks, CD-ROM drives, and scanners. (SCSI
stands for Small Computer System Interface.)
stands for Small Computer System Interface.)
Shut down the computer, turn off all external SCSI equipment, and
disconnect the first SCSI device in the chain from your computer’s SCSI
port. Then restart the computer. If the computer starts up after you
disconnect your SCSI equipment, refer to the manuals that came with the
equipment for information on the proper way to connect SCSI equipment
and assign SCSI ID numbers.
disconnect the first SCSI device in the chain from your computer’s SCSI
port. Then restart the computer. If the computer starts up after you
disconnect your SCSI equipment, refer to the manuals that came with the
equipment for information on the proper way to connect SCSI equipment
and assign SCSI ID numbers.
If you have a printer connected to your computer’s SCSI port, make sure
your printer is connected properly. Most printers connect to the printer
port, not the SCSI port. Check the manuals that came with your printer for
information on how to connect it properly.
your printer is connected properly. Most printers connect to the printer
port, not the SCSI port. Check the manuals that came with your printer for
information on how to connect it properly.
m System software is not installed on the startup hard disk, the system
software is damaged, or the hard disk is not working properly.
Insert the Macintosh Performa CD. Then follow the instructions in
“Repairing a Damaged Disk” later in this chapter, to test your startup hard
disk and repair any damage.
“Repairing a Damaged Disk” later in this chapter, to test your startup hard
disk and repair any damage.
If repairing the disk doesn’t help, follow the instructions in the Macintosh
Performa CD booklet to reinstall system software on your startup hard disk.
Performa CD booklet to reinstall system software on your startup hard disk.
84
Chapter 7