Справочник Пользователя для Digidesign Control 24

Send Pan

In Flip mode, the channel encoders are used to 
display and adjust pan position for stereo sends. 

The channel encoder LED ring displays the rela-
tive position of the PAN control. 

To toggle between left- and right-side pan controls 
on a stereo send:

■

Press the flashing master PAN L<C>R switch 

to toggle between left- and right-side pan con-
trols.

If the send is in multi-channel format, press the 
REAR or F/R switches in the PANS section to ac-
cess the panning controls for panning between 
a rear pair, or between front and rear, respec-
tively. 

Repeatedly pressing each of these switches will 
toggle between each side of any paired pan con-
trols and the divergence controls for that 
switch’s pair. 

The PAN L<C>R, REAR, and F/R switches each 
have a second label below each primary func-
tion for the switch. These parameters are front 
divergence (FRONT DIV), rear divergence (REAR 
DIV), and front/rear divergence (F/R DIV), re-
spectively. 

The switch LED will light solid when on the up-
per row and light flashing for the under row.

For stereo tracks, the PAGE switch is used to 
navigate between left and right channels. The 
default is LEFT, indicated when the PAGE switch 
LED is lit solid. 

Pressing PAGE will switch to right side panning, 
that is indicated by the PAGE switch LED flash-
ing. Pressing PAGE again will toggle back to the 
LEFT side.

Send Mute

In Send Flip mode, the channel MUTE switches 
become SEND MUTE controls. 

Pre/Post Toggling

In Send Flip mode, the PRE/POST switch LED 
lights, to indicate that pre/post send switching 
is available. The SWITCH ACTIVE switch LEDs 
also light on any channels that have an active 
send, to indicate that the associated encoder 
switch has a function.

To toggle a send between pre- and post-fader:

■

In Send Flip mode, press the encoder switch 

associated with any lit SWITCH ACTIVE LEDs to 
toggle the send between pre-fader and post-
fader configuration. 

The scribble strip will briefly show either “PRE” 
or “POST” before reverting to its previous state. 

To display pre- or post-fader status for a send:

■

Press the master PRE/POST switch. The chan-

nel’s scribble strip will display “Pre” or “Post” for 
as long as the switch is pressed. 

Only those channels with send destinations as-
signed will display this info. Other scribble 
strips will remain blank.