Справочник Пользователя для Digidesign Control 24

You can exit Flip mode at any time and return to 
normal operation by pressing the flashing FLIP 
switch. This action will return Control|24 to the 
state it was in prior to entering Flip. The FLIP 
switch LED will extinguish when the mode is 
exited.

Muting Sends

To mute a send in the Fader section: 

1  

Make sure the appropriate channels are 

banked into view on Control|24.

2  

Select the send to be muted by pressing the 

corresponding master SEND switch (A/F–E/J) in 
the SENDS section. 

3  

Press the SEND MUTE switch. Its LED will 

light, indicating that you are in Send Mute 
mode.

4  

Press a channel’s encoder switch on a channel 

to mute the selected send on that channel.

Pre/Post Fader Send Status 

To set pre/post send status from the Fader 
section:

1  

Make sure playback is stopped. 

2  

Make sure Control|24 is not in channel AS-

SIGN mode (the ASSIGN switch LED should be 
off). 

3  

Select a send by pressing a master SEND 

switch (A/F–E/J). 

4  

Press the global PRE/POST switch.

5  

Press a channel encoder switch to toggle the 

send between pre- and post-fader. The encoder 
switch LED will light when the send is pre-fader.

Send Shortcuts

To toggle a send between pre- and post-fader 
status for all channels:

1  

Follow steps 1 through 4 above.

2  

While pressing APPLY TO ALL CHANNELS or 

OPT(ALT)/ALL, press any channel’s encoder 
switch.

To toggle a send between pre- and post-fader 
status for all selected channels:

1  

Follow steps 1 through 4 above.

2  

While pressing APPLY TO ALL SELECTED 

CHANNELS or SHIFT/ADD+OPT(ALT)/ALL, 
press any channel’s encoder switch.

Flip Mode Applications

Cue/headphone mixes 

These are often built us-

ing one or more send busses. In practical use, es-
pecially during tracking, engineers must fre-
quently switch back and forth between their 
control room mix and one or more (discrete) 
cue or headphone mixes to satisfy requests from 
talent during the recording process. By enabling 
Flip mode for the cue mix send, levels in the 
headphones can be adjusted quickly using the 
faders. All Flip mode controls are fully automat-
able for even greater control over submixes. 

Submixes

Complex paths can be built using multiple send 
busses, Auxiliary Inputs and Master Faders. The 
channel send levels, that determine the mix 
heard in each submix, can be quickly set from 
the faders using Flip mode. Complex automa-
tion is greatly simplified through the use of 
Send Flip mode.