Справочник Пользователя для Digidesign Control 24
Control|24 Guide
132
Sys Info Page
The Sys Info page contains information about
the hardware and firmware revisions on Con-
trol|24, as well as the Ethernet ID.
the hardware and firmware revisions on Con-
trol|24, as well as the Ethernet ID.
To access the Sys Info page:
■
Press UTILITY > Sys Info.
Monitor Pages
The Monitor pages contain items which are spe-
cific to Control|24’s analog monitoring section.
cific to Control|24’s analog monitoring section.
To access the Monitor pages:
■
Press UTILITY > Monitor.
STEREO Page
“Single” Mode
In Single mode, only one moni-
tor section choice can be active at a time while
in Stereo mode (i.e., while not in a surround
mode). This is the default mode.
in Stereo mode (i.e., while not in a surround
mode). This is the default mode.
“Multi” or Multiple Mode
In Multi mode, you
can select multiple sources in an additive fash-
ion, and thereby monitor multiple sources si-
multaneously while in Stereo mode.
ion, and thereby monitor multiple sources si-
multaneously while in Stereo mode.
To set stereo mode:
1
Press UTILITY > Monitor > STEREO.
2
Select Single or Mult.
3
When finished, press EXIT.
Talkback Page
This mode allows you to specify the settings for
talkback mic operation. It provides a way to se-
lect whether the internally-mounted talkback
mic or an external mic is active. For more infor-
mation, please refer to “Talkback and Listen-
back” on page 58.
talkback mic operation. It provides a way to se-
lect whether the internally-mounted talkback
mic or an external mic is active. For more infor-
mation, please refer to “Talkback and Listen-
back” on page 58.
To select talkback mode:
1
Press UTILITY > TALKBACK.
2
Choose External or Internal.
3
When finished, press EXIT.
Test Pages
The Test pages include menu items for testing
various components and sections on Con-
trol|24.
various components and sections on Con-
trol|24.
To access the Test pages:
■
Press UTILITY > Test.
LED Test Pages
The LED test mode allows you to check that the
LEDs on the surface are functioning properly.
LEDs on the surface are functioning properly.
To access the LED test pages:
■
Press UTILITY > Test > LED.