Справочник Пользователя для Digidesign Control 24
Appendix B: Utility Functions
135
Timecode Display Test Mode
Timecode display test mode will continually cy-
cle through a series of automated tests which
check the LEDs and LED segments on the time
display located on the meter bridge of Con-
trol|24.
cle through a series of automated tests which
check the LEDs and LED segments on the time
display located on the meter bridge of Con-
trol|24.
When “time code” display test mode is
engaged:
engaged:
• The encoder switch LED located below the
scribble strip which shows “Timecode” will
light solid indicating that this is the chosen
test mode.
light solid indicating that this is the chosen
test mode.
• All other display test menu items shown on
the scribble strips as well as their associated
flashing encoder switch LEDs, will remain vis-
ible in this test mode. This allows you to select
another display test mode without the need
to first “Exit” this mode.
flashing encoder switch LEDs, will remain vis-
ible in this test mode. This allows you to select
another display test mode without the need
to first “Exit” this mode.
• Press the flashing encoder switch located be-
low the scribble strip showing another test
mode to simultaneously disengage the time-
code display test mode and enter the newly
selected mode. The encoder switch LED for
the new choice will light solid while the other
choices flash.
mode to simultaneously disengage the time-
code display test mode and enter the newly
selected mode. The encoder switch LED for
the new choice will light solid while the other
choices flash.
• When finished, press EXIT.
Scribble Strip Test Mode
Scribble strip test mode will continually cycle
through a series of automated tests which check
the segments on the LCD scribble strips.
through a series of automated tests which check
the segments on the LCD scribble strips.
When “Scribble” test mode is engaged:
• The encoder switch LED located below the
scribble strip which shows “Scribble” will
light solid indicating that this is the chosen
test mode.
light solid indicating that this is the chosen
test mode.
• All other display test menu items shown on
the scribble strips as well as their associated
flashing encoder switch LEDs, will remain vis-
ible in this test mode. This allows you to select
another display test mode without the need
to first “Exit” this mode.
flashing encoder switch LEDs, will remain vis-
ible in this test mode. This allows you to select
another display test mode without the need
to first “Exit” this mode.
• Press the flashing encoder switch located be-
low the scribble strip showing another test
mode to simultaneously disengage the scrib-
ble display test mode and enter the newly se-
lected mode. The encoder switch LED for the
new choice will light solid while the other
choices flash.
mode to simultaneously disengage the scrib-
ble display test mode and enter the newly se-
lected mode. The encoder switch LED for the
new choice will light solid while the other
choices flash.
• When finished, press EXIT.