Справочник Пользователя для DCS SW 6000
Danish Interpretation Systems
Installation Manual
Manual 01 19 60011
43
5 Computer Setup
The values in those fields are set during
installation.
installation.
The Computer name must be changed if a
database from another installation is restored to
this database.
database from another installation is restored to
this database.
Important: The name in “queue” field must not be
the same as the name in the “Computer” field.
The “queue” field must have the format :
the same as the name in the “Computer” field.
The “queue” field must have the format :
“Computer_name-SW6000”
6 Port Setting
This window is used for changing the
communication properties of the CU
6005/6010/6011.
communication properties of the CU
6005/6010/6011.
Make the changes, click ‘Update’ and then click
‘Next’.
‘Next’.
7 By selecting a Com port and Click ‘Select’ the
CUI application starts with connection to the port
chosen.
chosen.
Command line parameters for the CUI
-W
Show a communication window when the CUI is started. Don’t use
this parameter in normal use.
this parameter in normal use.
-COMx
Specifies the COM port to use. COM1 to COM4 are valid entries.
When the COM port is specified, the ‘Select COM port’ popup is
disabled.
When the COM port is specified, the ‘Select COM port’ popup is
disabled.