Справочник Пользователя для BENDIX BW2799

 

 

 

 

 

73

using SmarTire

™

 Hand Tool), it is evidence of a broken cradle and/or strap.  The 

sensor is simply falling to the lowest point in the wheel after each rotation.  
Remove the tire and replace the cradle and strap.  Depending on the damage 
done to the sensor itself, it may simply be pressed into a new cradle for reuse.  
Avoid reusing the strap – worm gear could be damaged internally.  

 
c.  If points a. and b. did not yield any results, the sensor is either missing or has 

been damaged.  Remove the wheel carefully and inspect the inside tire lining for 
any damage if the sensor, strap, and cradle are found to have been damaged 
and non-operational.  Replace strap, cradle, and sensor.  Program new ID into 
system using either the SmarTire

™

 Diagnostics Software, Single Tire Auto Learn 

feature, or the Gauge and SmarTire

™

 Hand Tool, LF Tool or LF Initiator.   

  

 
8.5 SMARTIRE

 
8.5.1 Q: The Tool does not power up or turns off when the “Activate” button is pressed. 
 
A:  Replace Batteries. 
 
8.5.2 Q: No tire pressure sensor data is received. 
 
A:  Make sure the Activate Antenna is held within 6" of the tire pressure sensor and positioned 
before the “Activate” button is momentarily pressed and that the tool is held in that position for at 
least 3.5 to 5 seconds. Try to activate and receive tire pressure sensor data from another tire 
pressure sensor.