Справочник Пользователя для Brother FAX-2840

Troubleshooting 

Dialing does not work.

Check for a dial tone.

Change Tone/Pulse setting. (See Quick Setup Guide.) (Canada only)
Check all line cord connections.

Check that the machine is plugged in and switched on.

Send a manual fax by pressing Hook/Hold and dialing the number. Wait to hear 
fax receiving tones before pressing Start.

The machine does not answer 
when called.

Make sure the machine is in the correct receive mode for your setup. (See 
Receive Modes settings uu page 29.) Check for a dial tone. If possible, call your 
machine to hear it answer. If there is still no answer, check the telephone line cord 
connection. If you do not hear ringing when you call your machine, ask your 
telephone company to check the line.

Cannot receive a fax.

Make sure your machine has a dial tone by pressing the Hook/Hold key. If you 
hear static or interference on your fax line, please contact your local telephone 
company.

Check all line cord connections. Make sure the telephone line cord is plugged into 
the telephone wall jack and the LINE jack of the machine. If you subscribe to DSL 
or VoIP services, please contact your service provider for connection instructions.

Make sure the machine is in the correct Receive Mode. This is determined by the 
external devices and telephone subscriber services you have on the same line as 
the Brother machine. (See Receive Modes settings uu page 29.) 

If you have a dedicated fax line and want your Brother machine to automatically 
answer all incoming faxes, you should select Fax Only mode.

If your Brother machine shares a line with an external answering machine, you 
should select the External TAD mode. In External TAD mode, your Brother 
machine will automatically receive incoming faxes and voice callers will be able to 
leave a message on your answering machine.

If your Brother machine shares the line with a Voice Mail subscriber service, 
please see Voice Mail uu page 33.

If your Brother machine is on a line with the Distinctive Ring subscriber service, 
please see Distinctive Ring uu page 34.

If your Brother machine shares a line with other telephones and you want it to 
automatically answer all incoming faxes, you should select the Fax/Tel mode. In 
Fax/Tel mode, your Brother machine will automatically receive faxes and 
produce a pseudo/double-ring to alert you to answer voice calls.

If you do not want your Brother machine to automatically answer any incoming 
faxes, you should select the Manual mode. In Manual mode, you must answer 
every incoming call and activate the machine to receive faxes.