Инструкции Пользователя для Biostar NM70I-1037U

The illustration shows how to set up jumpers. When the jumper cap is placed on 
pins, the jumper is “close”, if not, that means the jumper is “open”. 

   

 

 

 

 

 

Pin 

opened   Pin 

closed 

   Pin1-2 

closed 

Placing the jumper on pin2-3, it allows user to restore the BIOS safe setting and 
the CMOS data. Please carefully follow the procedures to avoid damaging the 
motherboard. 

 

3

1

     

 
Pin 1-2 Close: 
Normal Operation (default). 

 

 

3

1

 

 
Pin 2-3 Close: 
Clear CMOS data. 

※

1. 

Remove AC power line. 

2. 

Set the jumper to “Pin 2-3 close”. 

3. 

Wait for five seconds. 

4. 

Set the jumper to “Pin 1-2 close”. 

5. 

Power on the AC. 

6. 

Load Optimal Defaults and save settings in CMOS.