Инструкции Пользователя для Behringer Europort MPA400

Скачать
Страница из 8
EUROPORT MPA400
Control elements and connections
4
Online Registration
1.1.3 
Please register your new BEHRINGER equipment right after your purchase by visiting 
http://www.behringer.com and read the terms and conditions of our warranty carefully. 
Should your BEHRINGER product malfunction, it is our intention to have it repaired as quickly as 
possible.  To arrange for warranty service, please contact the BEHRINGER retailer from whom the 
equipment was purchased.  Should your BEHRINGER dealer not be located in your vicinity, you 
may directly contact one of our subsidiaries.  Corresponding contact information is included in the 
original equipment packaging (Global Contact Information/European Contact Information).  Should 
your country not be listed, please contact the distributor nearest you.  A list of distributors can be 
found in the support area of our website (http://www.behringer.com). 
Registering your purchase and equipment with us helps us process your repair claims more quickly 
and effi ciently. 
Thank you for your cooperation! 
Control elements and connections
2. 
{1}  LOUDSPEAKER.
{2}  CARRY HANDLE.
{3}  HOLES FOR SHOULDER STRAP.
{4} The rotary MIC LEVEL control allows you to adjust the volume level.
{5} The POWER switch turns the device on and off. When turned on, the LED of the POWER switch 
lights up.
Please note: The POWER switch does not fully disconnect the unit from the mains. To 
 
+
disconnect the unit from the mains, pull out the main cord plug or appliance coupler. 
When installing the product, make sure the plug or appliance coupler is readily operable. 
Unplug the power cord when the unit is not used for prolonged periods of time. 
{6} The CHARGE LED fl ashes yellow as long as the rechargeable battery is charging. It goes out 
when the battery is fully charged.
{7} The LOW BAT LED indicates that the rechargeable battery needs to be charged.
{8}  Connect the supplied BEHRINGER XM1800S microphone to the MIC IN input.
Never hold the microphone directly in front of the loudspeaker. Feedback hazard! When 
 
+
operating the device, keep the microphone behind the loudspeaker to avoid feedback.
{9}  You can connect an external sound source (CD player, MP3 player, etc.) to the LINE IN 
input.