Инструкции Пользователя для Behringer Europort MPA400
EUROPORT MPA400
Control elements and connections
5
Side view of the MPA400
Fig. 2.1:
(10) Connect to the power supply via the polarized DC IN connector. A fi tting power adapter is sup-
plied. Use the device only with the included power supply.
(11) COMPARTMENT FOR BATTERY AND SHOULDER STRAP. To insert the battery, open the
compartment’s cover. The bottom half of the compartment is used for the battery. Open the
latch to access the battery compartment.
latch to access the battery compartment.
Insert the battery as follows: The terminals must face the device with the positive terminal (red)
on the side of the MPA control panel (to the left, as seen from the rear panel). Insert the battery
and close the latch. Close the battery compartment.
on the side of the MPA control panel (to the left, as seen from the rear panel). Insert the battery
and close the latch. Close the battery compartment.
Insert the rechargeable battery with the terminals connected to the correct polarity.
+
Remove the rechargeable battery when the device is not to be used for a long period. Store
+
the rechargeable battery in an upright position (with the terminals facing upward).
The device's SERIAL NUMBER is found on the bottom side of the unit.