Справочник Пользователя для Barco Coronis Fusion 10MP
38
Coronis Fusion 10MP
Video input signals
A
BOUT
VIDEO
INPUT
SIGNALS
The available input signals for your display are:
T
O
MANUALLY
SELECT
A
VIDEO
INPUT
SIGNAL
:
1
Bring up the OSD main menu.
2
Navigate to the Configuration > Image Sources > (Left/Right)
Image Source menu.
Image Source menu.
3
Enter the Input Signal submenu.
4
Select one of the available input signals and confirm.
Your C
ORONIS
F
USION
10MP display automatically detects the
connected video input signals. Manually selecting image
source video input signals is possible, but then your display’s
image source selection mode should be set to allow this.
Please refer to “Image source selection modes” on page 36
to do this.
source video input signals is possible, but then your display’s
image source selection mode should be set to allow this.
Please refer to “Image source selection modes” on page 36
to do this.
DisplayPort 1
This input corresponds to the DisplayPort 1
connector as shown in the “Parts, controls
and connectors” section.
connector as shown in the “Parts, controls
and connectors” section.
DVI 1
This input corresponds to the DVI 1
connector as shown in the “Parts, controls
and connectors” section.
connector as shown in the “Parts, controls
and connectors” section.
DisplayPort 2
This input corresponds to the DisplayPort 2
connector as shown in the “Parts, controls
and connectors” section.
connector as shown in the “Parts, controls
and connectors” section.
DVI 2
This input corresponds to the DVI 2
connector as shown in the “Parts, controls
and connectors” section.
connector as shown in the “Parts, controls
and connectors” section.