Справочник Пользователя для Barco Coronis Fusion 10MP
40
Coronis Fusion 10MP
T
O
MANUALLY
SELECT
A
VIDEO
ENCODING
MODE
:
1
Bring up the OSD main menu.
2
Navigate to the Configuration > Image Sources > (Left/Right)
Image Source menu.
Image Source menu.
3
Enter the Video Encoding submenu.
4
Select one of the available video encoding modes and confirm.
Grayscale conversion modes
A
BOUT
GRAYSCALE
CONVERSION
MODES
Grayscale conversion modes specify how color generated on the display
controller is converted to grayscale in your display.
controller is converted to grayscale in your display.
The available grayscale conversion modes are:
Dual 10
Dual 10 is a Barco specific 10-bit video
encoding mode which is usually used on
grayscale displays and which allows full
refresh rate.
encoding mode which is usually used on
grayscale displays and which allows full
refresh rate.
Automatic
When selecting this option, your C
ORONIS
F
USION
10MP display will automatically
assign the correct video encoding settings
to the connected video input signals.
to the connected video input signals.
Your C
ORONIS
F
USION
10MP display automatically detects the
connected video input signals and applies the correct grayscale
conversion settings. Manually selecting a grayscale conversion
mode is possible, but then your display’s image source
selection mode should be set to allow this. Please refer to
“Image source selection modes” on page 36 to do this.
conversion settings. Manually selecting a grayscale conversion
mode is possible, but then your display’s image source
selection mode should be set to allow this. Please refer to
“Image source selection modes” on page 36 to do this.
Use Red Channel
This mode is intended for grayscale
displays where gray is sent over the red
channel.
displays where gray is sent over the red
channel.