Инструкции Для Сборки для West Elm Teak Bath Tall Tower
teak bath tower tall
assembly instructions
Page 2 of 4
5568852 - 03.05.08
1. Position the top (C) as shown, insert the 2 legs (D) into the opening located at each corner of the top
(C). Once the leg is fully inserted, apply bolt (A) into the center hole of the top bracing as shown.
Tighten fully using the enclosed allen key.
(C). Once the leg is fully inserted, apply bolt (A) into the center hole of the top bracing as shown.
Tighten fully using the enclosed allen key.
A
Allen
key
key
D
C
2. Insert the 4 Shelves (E) into the opening between the two previously-installed legs, align the holes from
the leg with the corresponding holes on the center of the shelf bracing (located on each corner). Apply
bolt (B) into the center hole of the shelf bracing as shown. Tighten fully using the enclosed Allen key.
the leg with the corresponding holes on the center of the shelf bracing (located on each corner). Apply
bolt (B) into the center hole of the shelf bracing as shown. Tighten fully using the enclosed Allen key.
E
E
E
E
B
Allen
key
key