Инструкции Для Сборки для West Elm Teak Bath Tall Tower
teak bath tower tall
assembly instructions
Page 4 of 4
5568852 - 03.05.08
CARE INSTRUCTIONS
Hardware may loosen overtime. Periodically check that all connections are tight.
Wipe with a soft, dry cloth. To protect fi nish, avoid the use of chemicals and household cleaners.
NOTICE:
To prevent injury and property damage from unexpected tipping of furniture, we highly
recommend installation of the anti-tip kit included with this product.
Attaching tower to wall with anti-tip kit.
1. Determine where the tower is to be placed and mark location on the wall for the mounting bracket
screw holes. They should be placed approximatly 2” below the top on the back of the tower.
2. Attach the mounting bracket vertically to the wall by inserting the Long screws provided through the
holes in the bracket and tightening securely using screwdriver. Screws must penetrate wall studs for
proper installation.
3. Next using the short screws attach the 2nd bracket to the back of the tower top frame.
4. Lace the nylon strap down through the brackets. Slide the thin end of the strap through the
receiving end of the nylon strap. Pull to tighten tower snug against wall.
screw holes. They should be placed approximatly 2” below the top on the back of the tower.
2. Attach the mounting bracket vertically to the wall by inserting the Long screws provided through the
holes in the bracket and tightening securely using screwdriver. Screws must penetrate wall studs for
proper installation.
3. Next using the short screws attach the 2nd bracket to the back of the tower top frame.
4. Lace the nylon strap down through the brackets. Slide the thin end of the strap through the
receiving end of the nylon strap. Pull to tighten tower snug against wall.
NOTE: There will be extra pieces left over from the anti-tip kit, please discard.
Mounting backet
2 long screws
2 Short screws