Инструкции По Установке для White Rodgers 25M01A-100 25M Gas Dryer Valves
FAILURE TO READ AND FOLLOW ALL INSTRUCTIONS CAREFULLY BEFORE
INSTALLING OR OPERATING THIS CONTROL COULD CAUSE PERSONAL INJURY
AND/OR PROPERTY DAMAGE.
INSTALLING OR OPERATING THIS CONTROL COULD CAUSE PERSONAL INJURY
AND/OR PROPERTY DAMAGE.
Operator: Save these instructions for future use!
DESCRIPTION
SPECIFICATIONS
Type of Gas:
Natural gas
LP gas (use conversion kit)
Pressure Regulator Setting:
Nat. Gas – 2.5" to 5.4" W.C.
LP Gas –
LP Gas –
7.0 to 12.0"W.C.
Ambient Temperature: 32° to 155°F
Pressure Rating: 14" W.C. (
Pressure Rating: 14" W.C. (
1
/
2
PSI) max.
Voltage: 120 VAC
Frequency: 60 Hz
Current: .06 amps
Frequency: 60 Hz
Current: .06 amps
Mounting Positions:
Control may be mounted in the following positions: horizontal,
vertical or 90° of horizontal. NOT UPSIDE DOWN.
Control may be mounted in the following positions: horizontal,
vertical or 90° of horizontal. NOT UPSIDE DOWN.
CONTENTS
Description ........................................................ 1
Specifications .................................................... 1
Precautions ....................................................... 2
Installation ......................................................... 2
Adjustment ........................................................ 3
Specifications .................................................... 1
Precautions ....................................................... 2
Installation ......................................................... 2
Adjustment ........................................................ 3
Pressure Regulator Adjustment
Lighting Instructions ........................................... 4
The 25M01A series valve is a combination gas pressure
regulator and dual automatic gas valve. These valves are de-
signed for gas clothes dryers with Hot Surface Ignition (HSI)
systems. These valves are equipped with redundant and main
solenoid valves that control the gas flow to the burner, and a
direct acting pressure regulator.
regulator and dual automatic gas valve. These valves are de-
signed for gas clothes dryers with Hot Surface Ignition (HSI)
systems. These valves are equipped with redundant and main
solenoid valves that control the gas flow to the burner, and a
direct acting pressure regulator.
25M01A-100 to 25M01A-199
HSI Single Stage Combination Gas Valve
INSTALLATION INSTRUCTIONS
www.white-rodgers.com
www.emersonclimate.com
PART NO. 37-6643B
Replaces 37-6643A
1207
PIPE SIZES/CAPACITIES
Pipe Sizes
Available
(inches)
Capacity (BTU/hr) at
1” pressure drop across valve
3
/
8
" NPT
Inlet
40,000
AGA Std. Nat. Gas
(1,000 BTU/cu. ft.)
65,000
LP Gas
(2,500 BTU/cu. ft.)