Руководство По Работе для Sony RM-VLZ620

RM-VLZ620_U (US) 4-170-639-12(1)

If you have problems setting up or using the RM-VLZ620, first check the 

batteries (page 8), then check the items below.

You cannot operate the 

device.

 Move closer to the device. The maximum operating distance is 

approximately 11 m (36 ft).

 Aim the RM-VLZ620 directly at the device. 

 Remove any obstacles in the path between the RM-VLZ620 

and the device.

 Power on the devices first, if necessary.

 Make sure you have pressed the correct Device Select button. 

 Check that the device has infrared remote capability. For 

example, if your device did not come with a remote control, it 

probably is not capable of being controlled by the RM-VLZ620.

 You have assigned a different device to the Device Select 

button. Check the device assigned to that button and the 

manufacturer’s code.

You cannot control the 

volume.

 Your video devices (e.g., DVD player) may be connected to an 

audio system. Change the factory preset of the volume control 

(page 18).

The Device Select 

buttons flash at a 

constant interval when 

you press a button.

 The batteries are weak. 

Replace them with new ones.

The SET indicator 

flashes once and turns 

off during setting.

 The manufacturer’s code cannot be set. Refer to the supplied 

“Manufacturer’s Code List” and set the manufacturer’s code 

again (page 13).

 If no operations are performed for 10 seconds while setting, the 

setting will be canceled, and must be restarted from the 

beginning.

The SET indicator 

flashes once when you 

press any button.

 The Hold function is on. Unlock the Hold function (page 31).

You cannot operate the 

device even after setting 

the manufacturer’s code.

 Set the manufacturer’s code correctly. If the first code that is 

listed does not work, set other codes in the order they are listed 

in the supplied “Manufacturer’s Code List.”

 Some features may not be preset.  If some or all of the buttons 

do not function correctly even after you have set the 

manufacturer’s code, then teach the RM-VLZ620 new 

functions by using the original remote control supplied with 

the device (page 20).

 The device may be operated with a manufacturer’s code that is 

not listed in the “Manufacturer’s Code List.” Set a 

manufacturer’s code again with the search function (page 15).

The signals of the 

remote control supplied 

with the device cannot 

be transmitted to the 

RM-VLZ620.

 When you teach signals of an interactive signal exchange 

system remote control unit (supplied with some of Sony’s 

amplifiers) to the RM-VLZ620, the response signal of the main 

unit may interfere with the learning of the RM-VLZ620. In 

such a case, move to a place where the signals will not reach the 

main unit (e.g., another room, etc.).