Справочник Пользователя для Nortel Networks Water System BCM 1000

Appendix E Using Element Manager to set the basic parameters

BCM 4.0 for BCM1000 Installation and Maintenance Guide Addendum

Configure the IP Terminal Global Settings attributes (see 

).

 

You can configure other attributes on the IP Terminal Global Settings tab depending on the 
requirements for your system.

From the Configuration tab, click the Administrator Access folder to expand it.

Select SNMP from the Administrator Access folder.

Select the General tab. It is normally selected by default.

Click Modify in the SNMP Settings area. The Modify SNMP Settings dialog box opens. 

Table 12   IP Terminal Global Settings attributes

Enable registration

Select this check box to allow new IP clients to register with the system. 

WARNING: Remember to clear this check box when you have finished 
registering the new telephones. 

Enable global registration 
password

If you want to require the installer to enter a password when IP telephones are 
configured and registered to the system, select this box. 

If this box is not selected (disabled), a valid Telset user ID and password is 
required to register IP phones.

Global password

If the Enable Global Registration Password check box is selected, enter the 
password the installer enters on the IP telephone to connect to the system. 

If this check box is left clear, no password prompt occurs during registration. 

Auto-assign DNs

If this check box is selected, the system assigns an available DN as an IP 
terminal requests registration. It does not prompt the installer to enter a set 
DN. 

If this check box is clear, the installer receives a prompt to enter the assigned 
DN during the programming session. 

Advertisement/Logo

Any information in this field appears on the display of all IP telephones. For 
example, your company name or slogan (24 characters in length). 

Tip: To automatically configure IP Phones with DNs assigned:

1) Select the Enable registration check box.

2) Select the Enable global registration password check box.

3) Leave the Global password field blank.

4) Select the Auto-assign DNs check box.

After the IP Phones are operational, clear the Enable registration check 
box.