Справочник Пользователя для Nortel Networks Water System BCM 1000

Appendix E Using Element Manager to set the basic parameters

N0060603

N0060603

Configure the attributes for Modify SNMP Settings (see 

Click Ok.

From the Configuration tab, click the Administrator Access folder to expand it.

Select SNMP from the Administrator Access folder.

Select the Community Strings tab.

Click Add.... The Add Community String dialog box opens. 

Configure the Add Community String attributes (see 

Click Ok.

Repeat steps 4 to 6 to add more community strings.

Use the SNMP manager list to specify IP addresses that are allowed to connect to the SNMP agent.

From the Configuration tab, click the Administrator Access folder to expand it.

Select SNMP from the Administrator Access folder.

Select the General tab. It is normally selected by default.

Click Add... in the SNMP Manager List area. The Add Manager dialog box opens.

Enter the IP address in the Manager IP Address field.

Click Ok.

Repeat steps 4 to 6 to add another manager IP address.

Table 13   Modify SNMP Settings attributes

Enable SNMP Agent

Select whether to enable or disable the SNMP agent by selecting (or not 
selecting) the check box. 

Minimum required security

Select the minimum required security for SNMP from the drop-down list.

SNMP Version Support

Select the SMNP version support from the drop-down list. 

Table 14   Add Community String attributes

Community string

Enter the entry name used as a key to uniquely identify an individual 
community entry on the SNMP agent.

Type of access

Specify the read and write access for this community. Available options are 
Read Only and Read/Write.