Справочник Пользователя для National Instruments Smart Camera

This section lists the specifications of the NI Smart Camera I/O Accessory. These specifications are 
typical at 25 °C, unless otherwise noted.

Refer to the NI 17xx Smart Camera User Manual for specifications about signals.

Supply voltage .......................................................24 VDC +20%/–15% (IEC 1311)

Current requirement ...............................................Refer to the specification for your NI Smart Camera

Dimensions ............................................................8.712 cm 

× 8.509 cm × 4.445 cm 

(3.43 in.

× 3.35 in. × 1.75 in.)

Weight ....................................................................98.1 g (3.46 oz)

Spring terminal blocks ...........................................6, 2 positions per block

Wire gauge .....................................................12–28 AWG wire

Camera connector ..................................................15-pin D-SUB male connector

RS-232 connector ..................................................9-pin D-SUB male connector

24VDC connector ..................................................15-pin D-SUB female connector

The NI Smart Camera I/O Accessory is intended for indoor use only.

Operating temperature ...........................................0 to 55 °C

Storage temperature ...............................................–20 to 70 °C

Humidity ................................................................10 to 90%, noncondensing

Pollution Degree ....................................................2

Approved at altitudes up to 2,000 m.

The NI Smart Camera I/O Accessory is designed to meet the requirements of the following standards of 
safety for electrical equipment for measurement, control, and laboratory use:

•

IEC 61010-1, EN 61010-1

•

UL 61010-1, CSA 61010-1

For UL and other safety considerations, refer to the product label, or visit 

ni.com/ 

certification

, search by model number or product line, and click the appropriate link in the 

Certification column.