Инструкции По Установке для Whirlpool WET4027EW

Electrical Requirements – Canada

 

n

To contact a qualified electrical installer.

 

n

To be sure that the electrical connection is adequate and in 

conformance with Canadian Electrical Code, C22.1 – latest 

edition and all local codes. A copy of above codes standard 

may be obtained from: Canadian Standards Association,  

178 Rexdale Blvd., Toronto, ON M9W 1R3 CANADA.

 

n

To supply the required 4-wire, single-phase, 120/240 volt,  

60 Hz, AC-only electrical supply on a separate 30-amp circuit, 

fused on both sides of the line. A time-delay fuse or circuit 

breaker is recommended. Connect to an individual branch 

circuit. 

 

n

This dryer is equipped with a CSA  

International Certified Power Cord  

intended to be plugged into a standard  

14-30R wall receptacle. The cord is 5 ft.  

(1.52 m) long. Be sure wall receptacle is  

within reach of dryer’s final location.

4-wire receptacle 

(14-30R)

If using a replacement power supply cord, it is recommended that 

you use Power Supply Cord Replacement Part Number 9831317.

For further information, please reference service numbers located 

in “Assistance or Service” section of your Use and Care Guide.