Справочник Пользователя для Amana NED4655EW

Скачать
Страница из 20
17
Reverse Door Swing (Optional)
29" 
Super Wide Side-Swing Door
Place towel on top of dryer to avoid damaging the surface.
NOTE: Magnetized screw driver is helpful.
Place towel on dryer
1.
q
  When the dryer has been running for 5 minutes, open the 
dryer door and feel for heat. If you feel heat, cancel cycle and 
close the door.
If you do not feel heat, turn off dryer, and check the 
following:
 
There may be 2 household fuses or circuit breakers for 
the dryer. Check that both fuses are intact and tight, or 
that both circuit breakers have not tripped. If there is still 
no heat, contact a qualified technician.
NOTE: You may notice an odor when the dryer is first heated. 
This odor is common when the heating element is first used.  
The odor will go away.
Remove bottom screws
2.
Open dryer door. Remove bottom screws from dryer cabinet 
side of hinges. Loosen (do not remove) top screws from dryer 
cabinet side of hinges.
Lift door until top screws in dryer cabinet are in large part of 
hinge slot. Pull door forward off screws. Set door (handle side 
up) on top of dryer. Remove top screws from dryer cabinet.
Lift door off top screws
3.
Remove screws from hinges
4.
Remove screws attaching hinges to door.
Remove screws at top, bottom, and side of door (4 screws) 
that hold the inner and outer door together. Holding door over 
towel on dryer, grasp sides of outer door and lift to separate it 
from inner door. Set outer door aside.
NOTE: Do not pry apart with putty knife or screwdriver.  
Do not pull on door seal or plastic door catches.
Remove screws from door
5.