Инструкция С Настройками для Sunpentown WA1350DE
8
OPERATING INSTRUCTIONS
COOL mode (operating temperature range: 17-35°C/62-95°F)
COOL mode (operating temperature range: 17-35°C/62-95°F)
Press the MODE button until the COOL indicator light illuminates.
Press UP (
∧
) or DOWN (
∨
) buttons to set your desired room temperature. The temperature
can be set within a range of 17-30°C / 62-88°F.
Press the FAN SPEED button to select desired fan speed.
Note: When room temperature is 37°C/98°F or above, the fan speed is automatically controlled
at low. Unit will resume to previous fan speed when room temperature falls below 35°C/93°F.
at low. Unit will resume to previous fan speed when room temperature falls below 35°C/93°F.
DRY mode (operating temperature range: 13-35°C/54-95°F)
Press the MODE button until the DRY indicator light illuminates.
Under this mode, you cannot select a fan speed or adjust the temperature. Fan is on LOW.
Keep windows and doors closed for best dehumidifying effect.
Do not attach duct to window.
FAN mode
Press the MODE button until the FAN indicator light illuminates.
Press the FAN SPEED button to select speed. Temperature cannot be adjusted.
Do not attach duct to window.
AUTO mode
AUTO operation can only be set by the remote controller. Refer to instructions on page 17.
TIMER operation
Setting the ON timer:
Press the TIMER ON button when unit is off.
Press the UP (
∧
) or DOWN (
∨
) button to select the time you want to start operating the unit.
Setting the OFF timer:
Press the TIMER OFF button when unit is operating.
Press the UP (
∧
) or DOWN (
∨
) button to select the time you want the unit to stop operation.
Note:
The timer is adjustable from 0.0 to 24
The time is programmed as: 0.5, 1.0, 1.5, 2.0, 2.5, 3.0, 3.5, 4.0, 4.5, 5.0, 5.5, 6.0, 6.5, 7.0,
7.5, 8.0, 8.5, 9.0, 9.5, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 0.0.
7.5, 8.0, 8.5, 9.0, 9.5, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 0.0.
The time will register after 5 seconds of releasing the (
∧
) or (
∨
) button. Continue pressing
until the desired time is established. Once the time is registered and change is needed, you
must repeat the steps.
must repeat the steps.
Auto-Restart
If unit breaks off unexpectedly due to power failure, unit automatically restarts at previous setting
when power resumes. If power is resumed in less than 3 minutes, unit will auto-start after a 3
minutes delay – this is a safety feature to protect the unit.
when power resumes. If power is resumed in less than 3 minutes, unit will auto-start after a 3
minutes delay – this is a safety feature to protect the unit.
Air Flow Direction Adjustment
The louver can be manually adjusted to desired position, but keep louver fully opened during
operation.
operation.