Инструкция С Настройками для Sunpentown WA1350DE
10
Fig.5
Fig.6
Fig.7
Fig.8
Installation in a double-hung sash window
1. Trim foam seal (adhesive type) to the proper
length and attach to window stool. (Fig.5)
2. Adjust the length of the slider kit according to the
width of window. Attach window slider kit to
window stool, on top of foam seal. (Fig.6)
window stool, on top of foam seal. (Fig.6)
3. Trim the foam seal (adhesive type) to the proper
length and place on top of the slider kit. (Fig.7)
4. Close window sash securely against window.
5. Trim the last foam seal to the proper length to seal
the open gap between the top window sash and
outer window sash. (Fig.8)
outer window sash. (Fig.8)
Fig.9
Fig.10
Fig.11
Installation in a double-hung sash window
1. Trim foam seal (adhesive type) to the proper
length and attach to window frame. (Fig.9)
2. Adjust the length of the slider kit according to the
height of window. Attach window slider kit against
foam seal. Trim other foam seal (adhesive type) to
the proper length and attach to open side of
window kit (or side of window) (Fig.10)
foam seal. Trim other foam seal (adhesive type) to
the proper length and attach to open side of
window kit (or side of window) (Fig.10)
3. Slide window close against slider kit.
4. Trim the last foam seal to the proper length to seal
the open gap between the two window sashes.
(Fig.11)
(Fig.11)