Инструкции Пользователя для Electrolux E32AF75JPS

If door must be removed:

•     Unplug the unit or switch the breaker that supplies  
 

power to the unit to the off position.

•   Remove the plastic top hinge cover.
•   Hold the door in place while removing the top  
 

hinge from the cabinet. 

•   Remove the two 3/8” hex head bolts from the top  
 

hinge with a 3/8” wrench or socket.

•   Lift the door upwards and pull up and away from  
 

the cabinet until free of the bottom hinge pin   

 

mounted on the front of the cabinet.

•  

To replace the door, reverse the above procedures  

 

and securely tighten all screws to prevent hinge  

 slippage.

For safe food storage, allow four (4) hours for freezer to cool down completely.  The freezer will run continuously 
for the fi rst several hours.

The 

Custom Set™ Electronic Control

 is located inside the freezer.  Temperature is factory preset to provide 

satisfactory food storage temperatures.  However, the temperature control is adjustable to provide a range of 
temperatures for your personal satisfaction.  

To adjust the temperature setting, press the UP (+) key for warmer temperature and DOWN (-) key for colder 
temperature on the control panel.  Allow several hours for the temperature to stabilize between adjustments.  
The freezer can be adjusted between -10°F (-23°C) and 10°F (-12°C).  By pressing the TEMP MODE key, the 
temperature display will toggle between °F to °C.  

To turn the freezer OFF, press the UP (+) key until the warmest temperature setting of 10Fº (-12Cº) shows in the 
display.  Then press the UP (+) key three (3) times within three (3) seconds to turn the freezer OFF.  The display 
will then scroll “OFF” across the display.  To turn the unit back ON, press the DOWN key three (3) times within 
three (3) seconds.  The control will then display “10Fº (-12Cº)” and may be adjusted to the desired temperature.