Листовка для Lorex Technology ACC1721HB
QUICK START GUIDE
Product Information
User Manuals
Quick Start Guides
Specification Sheets
Software Upgrades
Firmware Upgrades
English Version 1.0
MODEL:
ACC1721HB
www.lorexcctv.com
MODEL:
VISIT:
Lorex Technologies Inc.
Copyright © 2008 Lorex Technologies Inc.
As our products are subject to continuous
improvement, Lorex reserves the right to
modify product design, specifications and
prices, without notice and without incurring
any obligation. E&OE
Copyright © 2008 Lorex Technologies Inc.
As our products are subject to continuous
improvement, Lorex reserves the right to
modify product design, specifications and
prices, without notice and without incurring
any obligation. E&OE
It’s all on the Web!
Specifications
WEATHERPROOF
CAMERA ENCLOSURE
WITH HEATER AND BLOWER
E
NCLOSURE
Wall Mount Bracket
Precautions:
•
Use a UL/CSA approved 24V AC power supply.
•
Use an appropriate low voltage power cable to
prevent fire or electrical shock.
prevent fire or electrical shock.
•
Make sure to install the camera in an area that
can support the camera weight.
can support the camera weight.
•
There are no user serviceable parts inside the
enclosure. Please do not disassemble the
enclosure.
enclosure. Please do not disassemble the
enclosure.
•
Do not clean the lens cover with an abbrasive
cleaning material—please use a soft cloth to
clean the lens cover.
cleaning material—please use a soft cloth to
clean the lens cover.
•
This housing is not recommended for use with
cameras featuring IR LEDs, due to the potential of
reflection.
cameras featuring IR LEDs, due to the potential of
reflection.
Power Requirement
24V AC/ 9W
Heater Operation Level
On: 15°C ±3°C / 59°F ±5.4°F
Off: 25°C ±3°C / 77°F ±5.4°F
Blower Operation Level
On: 35°C ±3°C / 95°F ±5.4°F
Off: 25°C ±3°C / 77°F ±5.4°F
Weatherproof Rating
IP66
Emclosure Dimensions
142(W)x370(D)x115(H)mm /
5.6(W)x14.6(D)x4.5(H)in
5.6(W)x14.6(D)x4.5(H)in
Emclosure Window
Dimensions
Dimensions
74(W)x63(H)mm /
2.9(W)x2.5(H)in
2.9(W)x2.5(H)in
Bracket Length
205mm / 8.1in
Maximum Supported Weight 10kg / 22lbs
Swivel Angle
up to 360°