ЛистовкаСодержание*Requires optional lock2Figure 3.0 Connect wires (x2) to power input terminals2Figure 4.0 Feed cables through duct and tighten cap2Note: Make sure you have drilled any necessary holes in your mounting surface and run sufficient lengths of extension cables (not included) for your camera (not included).2Figure 1.0 Enclosure base21. Open the enclosure and remove the camera base. Use the included screws to attach the camera to the base.2Figure 2.0 Place camera in enclosure2Размер: 791,7 КБСтраницы: 2Язык: EnglishПросмотреть
