Справочник Пользователя для Mitsubishi Electronics DX-TL1600EM
16
•••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••
Basic Operations (continued)
7. Turn the JOG dial to select “ON”.
<TIME DATE SEARCH> 3
17-05-2001 21:25:40
EXECUTE
ON
TURN THE SHUTTLE RING
>> TO EXECUTE.
>> TO EXECUTE.
8. Turn the SHUTTLE ring to the right to execute.
• The time date search will start and pause the playback
display at the specified time point to select the camera number
(or the nearest point from the specified time).
display at the specified time point to select the camera number
(or the nearest point from the specified time).
17-05-2001 21:25:40 C03
Search results are displayed on a SPLIT 16 screen
when “ALL” is selected in the SELECTION CAMERA
NO. setting, and displayed on a single screen when
an individual camera number is selected.
NO. setting, and displayed on a single screen when
an individual camera number is selected.
To change the search image from SPLIT 16
screen to the single screen, select the camera
number by pressing the Camera number button on
the front of this unit. The selected image will be shown
on the Single screen mode.
number by pressing the Camera number button on
the front of this unit. The selected image will be shown
on the Single screen mode.
If there is no recording or no data which is re-
corded on the date you have set, the time date
search will not be activated and the date number
will start flashing again.
search will not be activated and the date number
will start flashing again.
9. To play back the searched image.
• Press either the PLAY button or the PAUSE button.
INFORMATION
Press the SEARCH button to clear
the <TIME DATE SEARCH> menu.
10. Press the STOP button to stop playback and still frame
mode.
mode.
• Press the SEARCH button, the display will revert to its
original state.
original state.
■
Copying the data from HDD to a copying
device or an archive device
This unit can copy the data which is recorded on hard disk
drive to an archive device media or a copying device me-
dia. The following explains how to copy the data manually.
drive to an archive device media or a copying device me-
dia. The following explains how to copy the data manually.
Make sure that the peripheral recording device is
connected and set correctly before you start copying.
1. Turn on the power of the peripheral recording device
connected to the unit.
connected to the unit.
2. Turn on the power of the digital unit.
3. Insert media to archive device
Glossary
or a copying device
Glossary
.
4. Press the COPY button.
• The <COPY SELECTION> menu will appear.
5. Make sure that the cursor ( ) is next to the COPY
DIRECTION, and turn the SHUTTLE ring to the right.
DIRECTION, and turn the SHUTTLE ring to the right.
• The sub-item will be different depending on the connected
devices.
• Use JOG dial to choose the desired device to copy to and
turn the SHUTTLE ring to the right to enter the selection.
devices.
• Use JOG dial to choose the desired device to copy to and
turn the SHUTTLE ring to the right to enter the selection.
<COPY SELECTION>
@COPY DIRECTION HDD}COPY
@COPY DIRECTION HDD}COPY
OVERWRITE OFF
TRANSFER PERIOD MAN
FROM:29-01-01 09:25:24
FROM:29-01-01 09:25:24
6. Turn the JOG dial to move the cursor to OVERWRITE and
turn the SHUTTLE ring to the right.
turn the SHUTTLE ring to the right.
• The default setting is “OFF”. You have to select whether to
overwrite previous recorded data (ON) or copying from the
end of the recording exists on the media (OFF). Turn the
JOG dial to make the desired setting to flash, then turn the
SHUTTLE ring to the right to enter the selection.
overwrite previous recorded data (ON) or copying from the
end of the recording exists on the media (OFF). Turn the
JOG dial to make the desired setting to flash, then turn the
SHUTTLE ring to the right to enter the selection.
<COPY SELECTION>
COPY DIRECTION HDD}COPY
@OVERWRITE OFF
TRANSFER PERIOD MAN
FROM:29-01-01 09:25:24
FROM:29-01-01 09:25:24
<COPY SELECTION>
COPY DIRECTION HDD}COPY
@OVERWRITE ON
TRANSFER PERIOD MAN
FROM:29-01-01 09:25:24
FROM:29-01-01 09:25:24
INFORMATION
The following sub-items can be set
for the overwrite copying:
• If you set to “ON”, the copy will start from the very
beginning of the media.
• If you set to “OFF”, the copy will start from the end
of the last recorded part of the media.
• If you set to “ON”, the copy will start from the very
beginning of the media.
• If you set to “OFF”, the copy will start from the end
of the last recorded part of the media.
7. Set the TRANSFER PERIOD.
• Turn the JOG dial to move the cursor next to the “TRANSFER
PERIOD” then turn the SHUTTLE ring to the right. The sub-
item of “MAN” (manual) will start flashing.
PERIOD” then turn the SHUTTLE ring to the right. The sub-
item of “MAN” (manual) will start flashing.
<COPY SELECTION>
COPY DIRECTION HDD}COPY
OVERWRITE OFF
OVERWRITE OFF
@TRANSFER PERIOD MAN
FROM:29-01-01 09:25:24
The following sub-item can be set
for the “TRANSFER PERIOD” of copying.
By turning the JOG dial, the sub-item will be changed
as below:
By turning the JOG dial, the sub-item will be changed
as below:
MAN S/E
“MAN”: Set the start time and end time of copying
manually.
manually.
“S/E”: Copy all data from the start to the end of the
device which is recognized as a device to copy from.
device which is recognized as a device to copy from.
8. Turn the JOG dial to move the cursor to the start time
(FROM), and set the date, month, year, hour, minute and
second of the data to copy from.
(FROM), and set the date, month, year, hour, minute and
second of the data to copy from.
• Turn the JOG dial to set the start time.
• Turn the SHUTTLE ring to the right to enter the selection.
• Turn the SHUTTLE ring to the right to enter the selection.