Справочник Пользователя для Mitsubishi Electronics C64T

 

7 

8201  AX. RELEASE 

Select the function to remove the control axis from 
the control target. 

0:  Control as normal  
1:  Remove from control target 

0/1 

8202  OT-CHECK OFF 

Select the stored stroke limit function set in #8204 
and #8205. 

0:  Stored stroke limit valid  
1:  Stored stroke limit invalid 

0/1 

8203  OT-CHECK-CANCEL  When the simple absolute position method ("#2049 

type" is 9) is selected‚ the stored stroke limits I, II (or 
IIB) and IB will be invalid until the first reference 
point return is executed after the power is turned on. 

0:  Stored stroke limit II valid (according to #8202) 
1:  Stored stroke limit II invalid 

(Note)  This setting (#8203) affects all the stored 

stroke limits. 

0/1 

8204  OT-CHECK-N 

Set the coordinates of the (–) direction in the 
moveable range of the stored stroke limit II or the 
lower limit coordinates of the prohibited range of 
stored stroke limit IIB. 
If the sign and value are the same as #8205 (other 
than "0"), the stored stroke limit II (or IIB) will be 
invalid. 
If the stored stroke limit IIB function is selected, the 
prohibited range will be between two points even 
when #8204 and #8205 are set in reverse.  
When II is selected, the entire range will be 
prohibited. 

–99999.999 to 
+99999.999 (mm) 

8205  OT-CHECK-P 

Set the coordinates of the (+) direction in the 
moveable range of the stored stroke limit II or the 
upper limit coordinates of the prohibited range of 
stored stroke limit IIB. 

–99999.999 to 
+99999.999 (mm) 

8206  TOOL CHG. P 

Set the coordinates of the tool change position for 
G30. n (tool change position return).  
Set with coordinates in the basic machine coordinate 
system. 

–99999.999 to 
+99999.999 (mm) 

8207 G76/87 IGNR 

(For M system only) 

Select the shift operation at G76 (fine boring) and 
G87 (back boring). 

0:  Shift effective  
1: No shift 

0/1