Справочник Пользователя для Mitsubishi Electronics FX2NC
FX Series Programmable Controlers
Applied Instructions 5
5-42
5.5
Data Operation - Functions 40 to 49
Contents:
Page
ZRST -
Zone Reset
FNC 40
5-43
DECO -
Decode
FNC 41
5-43
ENCO -
Encode
FNC 42
5-44
SUM -
The Sum Of Active Bits
FNC 43
5-45
BON -
Check Specified Bit Status
FNC 44
5-45
MEAN -
Mean
FNC 45
5-46
ANS -
(Timed) Annunciator Set
FNC 46
5-47
ANR -
Annunciator Reset
FNC 47
5-47
SQR -
Square Root
FNC 48
5-48
FLT -
Float, (Floating Point)
FNC 49
5-49
Symbols list:
D - Destination device.
S - Source device.
m, n- Number of active devices, bits or an operational constant.
Additional numeric suffixes will be attached if there are more than one operand with the same
function e.g. D
S - Source device.
m, n- Number of active devices, bits or an operational constant.
Additional numeric suffixes will be attached if there are more than one operand with the same
function e.g. D
1
, S
3
or for lists/tabled devices D
3+0,
S
+9
etc.
MSB - Most Significant Bit, sometimes used to indicate the mathematical sign of a number, i.e.
positive = 0, and negative = 1.
LSB - Least Significant Bit.
positive = 0, and negative = 1.
LSB - Least Significant Bit.
Instruction modifications:
-
An instruction operating in 16 bit mode, where
identifies the instruction
mnemonic.
P - A 16 bit mode instruction modified to use pulse (single) operation.
D
- An instruction modified to operate in 32 bit operation.
D
P - A 32 bit mode instruction modified to use pulse (single) operation.
- A repetitive instruction which will change the destination value on every scan unless
modified by the pulse function.
- An operand which cannot be indexed, i.e. The addition of V or Z is either invalid or will
have no effect to the value of the operand.