Справочник Пользователя для Meco Bonza Series

Bottom Panel

Drip Pan

6. Close the hood and remove the drip pan and bottom

panel to dispose of ashes. The bottom panel can be

removed by first removing the screw on each side of

the grill. For easier cleaning of charcoal ashes the bot-

tom panel can be lined with aluminum foil. Make sure

all openings are left unobstructed and cut a hole for the

grease to drip into the grease pan.

7. Reinstall drip pan and bottom panel.

8. Reinstall the burners and lower the louvers into position.

Make sure the left louver rests on the right louver when

rotated into position.

9. Push, then pull the louver adjusting knob to ensure the

louvers function correctly.

10. Install cooking grids.

11. Position louvers in either gas or charcoal mode to

prepare for next cooking session.

Cleaning instructions for Charcoal and

Wood chunk ash(Continued)

· Follow all instructions and warnings listed on the

polyurethane container.

· Always use a brush to apply the polyurethane, do not

use a spray can.

· Do not apply polyurethane to the metal grill body.

· Using the Grill Storage Cover (50) will help maintain

the appearance of your grill and protect the finish.

In addition to the above Care and Maintenance Instruction,

periodically check and tighten all nuts, bolts, and screws.

Preventive Maintenance

· Always turn off the LP gas cylinder at the LP

cylinder valve when not in use. Allow grill to cool

before handling parts or cleaning.

· Do not use aerosols or store flammable liquids or

materials near this gas grill.

· Never apply polyurethane to the wood cart while

grill is in use or hot. Allow polyurethane to

completely dry before further use.

Caring for the Wood Cart

· Never store an LP gas cylinder indoors (empty or

filled). If storing the gas grill indoors,

disconnect the LP gas cylinder and store it outdoors

out of the reach of children.

· Never leave an LP gas cylinder inside a

vehicle which may become overheated by the sun.

· Never store a spare or disconnected LP gas

cylinder under or near the LP gas grill.

· Always turn off the gas cylinder when not in use.

Allow grill to cool before handling parts or

cleaning.

· Even though your LP gas cylinder may appear to

be empty, gas may still be present and the cylinder

should be transported and stored accordingly.

· Store your LP gas grill in a cool dry place .

· Disconnect LP gas cylinder from grill and store outside,

in a dry, well-ventilated area, away from any sources of

heat or ignition. Re-cap LP cylinder valve with the Safety

Cap.

· Remove burners and wrap with aluminum foil to prevent

insects from entering the burner holes. Store wrapped

burners on top of the cooking grids.

· Before next use, remove aluminum foil and reinstall

burners and grids according to Steps 8 and 10 of

Assembly Instructions.

· Check your LP gas grill for gas leaks, deterioration,

proper assembly, and burner obstructions before using the

Storage

Your Cart is manufactured using a hardwood ideally suited

to outdoor use. To maintain its condition and appearance,

annual application of polyurethane is recommended.