Справочник Пользователя для Mitsubishi Electronics FR-D720S-0.1K to 2.2K

1 OUTLINE

1.1 Product checking and parts identification

Unpack the inverter and check the capacity plate on the front cover and the rating plate on the inverter side face to ensure that
the product agrees with your order and the inverter is intact.

Inverter model

REMARKS

· For how to find the SERIAL number, refer to page 46.

Harmonic suppression guideline (when inverters are used in Japan)
All models of general-purpose inverters used by specific consumers are covered by "Harmonic Suppression Guidelines for Consumers

Who Receive High Voltage or Special High Voltage". (For further details,

refer to Chapter 3 of the Instruction Manual (Applied).)

FR -

Symbol

Voltage class

D740

1.5

Represents the
inverter capacity [kW]

D720

Three-phase 200V class

D740

Three-phase 400V class

D720S

Single-phase 200V class

D710W

Single-phase 100V class

Capacity plate

Inverter model

Serial number

1.5K

Rating plate

FR-D740-1.5K

Inverter model

Input rating

Output rating

Serial number

Production year and month

Control circuit terminal block
(Refer to page 9)

Control logic switchover jumper
connector
The jumper connector is in the sink
logic (SINK) when shipped from the
factory. Move the jumper connector
to change to the source logic
(SOURCE). Always fit the jumper
connector to the either position.
(

Refer to the Instruction Manual

(Applied))

Combed shaped wiring cover
Refer to the Instruction Manual
(Applied) for installation/removal.

Main circuit terminal block
(Refer to page 9)

Front cover
Refer to the Instruction
Manual (Applied) for
installation/removal.

PU connector
(Refer to page 8)

Voltage/current input switch
(Refer to page 8)

Operation panel
(Refer to page 2)

Cooling fan
The cooling fan is removable.

• Accessory

· Fan cover fixing screws (M3

× 35mm)

These screws are necessary for compliance with the

EU Directive. (Refer to page 43)

Capacity

Quantity

1.5K to 3.7K

5.5K to 15K