Справочник Пользователя для Lucent Technologies 6.1

Issue 1

August 1998

Control Unit Configuration 

Page 2-7

Recording System Operating Conditions 

2

This section contains instructions for recording the following system operating 
conditions:

■

Programming equipment to be used and its extension jack assignment

■

■

■

■

■

■

■

■

2

2

Two types of equipment can be used for system programming:

■

An MLX-20L telephone identified as a system programming console. The 
telephone is connected to the first (lowest) extension jack (which is 
factory-set for system programming) on the first MLX module.

■

A personal computer with System Programming and Maintenance (SPM) 
software. The PC connects to the lowest jack on the processor module.

2

1.

Under the Programming Equipment heading in the System Operating 
Conditions section on Form 1 (page 2), do 

one of the following:

■

If the system will use a system programming console, check the 
System Programming Console box.

■

If the system will use a PC with SPM software, check the PC with 
SPM Software box. 

1. In conjunction with the MLX-20L telephone and the PC, a PCMCIA card is 

required for Release 3.0 and later of the communications system. Check 
the box labeled PCMCIA Memory Card.

2. The first (lowest) extension jack on the first MLX module is factory-set for 

system programming and as the primary operator position. Since the 
primary operator position cannot be reassigned, you may want to change 
the system programming assignment to ensure that future programming 
sessions do not interfere with the operator’s work.