Справочник Пользователя для Lucent Technologies 6.1

Issue 1

August 1998

Control Unit Configuration 

Page 2-9

Recording System Operating Conditions 

2

In Release 1.1 and later versions of the system, language-specific operation is 
available in English, French, and Spanish. The language selection affects 
prompts and displays on user telephones, SPM system programming displays, 
SMDR records, and printed reports.

This feature works as follows:

■

The MLX-10D, MLX-20L, and MLX-28D display telephones, and the 
MLX-10 nondisplay telephones are available in three separate versions, 
each with the factory-set buttons in the language of choice.

■

The system can be programmed to operate in one of the languages, but an 
individual with an MLX telephone can override the system language by 
selecting any one of the three languages for his or her own telephone.

This section describes how to record the selected language for the system and, if 
desired, to set a different language for SMDR and printers.

If you plan to set a different language for an individual telephone, record the 
language selection on Form 6b as described in Chapter 4, “Features”.

2

Under the Language Selection heading in the System Operating Conditions 
section of Form 1 (page 2):

1.

To select a systemwide language, check 

one of the following: English (the 

factory setting), French, or Spanish.

2.

To set a different language for SMDR, check 

one of the following: English 

(the factory setting), French, or Spanish.

3.

To set a different language for printed reports, check 

one of the following: 

English (the factory setting), French, or Spanish.